IE2 or IE3, IP55, multiple voltage multi-frequency, S1 aluminum body

DELPHI three-phase motors 56-132

IE2 or IE3, IP55, multiple voltage multi-frequency, S1 aluminum body

type of power
56 aluminum 0,06kW-11kW
63
71
80
90
100
112
132
160 cast-iron 4kW-315kW
180
200
225
250
280
315
355

Motive motors are built according to international standard regulations; each size throughout the construction forms is calculated with reference to the tables of standard IEC 72-1.

All motors are multiple voltage multi-frequency 50/60Hz, F class insulation, (H on request) S1 continuous duty service, IP55 protection (IP56, 66, 67, and 68 on request) IE2 or IE3 efficiency class tropicalized winding suitable for inverter power supply

IE2, high efficiency class IE 60034-30
IE3, premium efficiency class IE 60034-30

The copper is impregnated with a double layer of H class insulating enamel to ensure high resistance to electrical, thermal and mechanical stress. The phases are further isolated by another layer of Nomex film to protect the motors from the voltage peaks that usually occur when the motor is controlled by an inverter.

Bearings selected for their silence and reliability and, for the same objectives, the cage rotor is dynamically balanced.

From type 90, a steel insert is provided in the bearing slot of the aluminum flanges, to resist to radial mechanical forces with a fair degree of security

Motive asynchronous three-phase delphi series motors are closed, and externally ventilated. The frame, up to 132 included, is made in die casting aluminium alloy, from size 160 up to 355 the frame is made in cast iron.

Aiming the maximum protection, the motors are equipped with important details like the pull-resistant cable gland and the combination of bearings with two shields each with rubber seal rings

Cable gland can be easily moved on both the sides of the connection box, thanks to the screw cap The connection box can be rotated of 360° with steps of 90°

To protect them by the rust, motive motors are painted in silver RAL9006 colour

Performance excellence is granted by the low loss CRNO “FeV” magnetic laminations adoption,instead then the usual Semi Processed/Decarb “FeP01”. FeV laminations provide higher efficiency, lower heating, energy saving and longer life to insulation materials

From size 56 to size 132, feet are detachable, and can be fixed on 3 sides of the housing, thus permittig the terminal box to be positioned up, right or left

Download Area Manuals and Catalogs

3D animations
Our products
motors
IE2 or IE3, IP55, multiple voltage multi-frequency, S1 aluminum body
motors
IE2 or IE3, IP55, multiple voltage multi-frequency, S1 cast-iron frame
motors
selfbraking motors use one or 2 spring-pressure brakes
motors
for ambient temperatures up to 100°C, and S1 continuous duty
motors
single phase, F class, S1 duty service, IP55
motors
ATEX certified motors for zones 1-2-21 and 22, Cat. 2 and 3, Dust and Gas
v.f.drives
patented system, easy to use, IP65, with removable control panel, remotable wireless
v.f.drives
variable speed drive, for 1PH supply and 3PH motors, up to 2.2kw
v.f.drives
control unit for air suction and ventilation
v.f.drives
compressors control unit
v.f.drives
control units for single phase and three phase hydraulic power packs
v.f.drives
VFD for the automatic control of water pumping systems
v.f.drives
island or hybrid drive for solar pumps and motors
v.f.drives
ATEX certified V.F.Drives for zones 21 and 22, Cat. 2 and 3, Dust
gearboxes
The gearbox model ROBUS-A completes ROBUS range
gearboxes
made in cast iron, with a capacity of up to 4300Nm
gearboxes
Monolithic iron body for heavy duty, bevel gears in the second stage, max 600Nm
gearboxes
for shaft mounting too. Monolitic iron body. Max 700Nm
gearboxes
made with die-casting aluminium housing from size 25 up to 90, and in cast iron from size 110
gearboxes
to be mounted on any type of fitted geared motor (PAM)
gearboxes
new planetary cone disc variators
gearboxes
ATEX certified gearboxes for zones 1-2-21 and 22, Cat. 2 and 3, Dust and Gas